Overview

This experiment demonstrates a bistable flip-flop circuit that can store two stable states and control a relay to switch loads on and off.

Components Required

• 2 SPDT Relays
• Flip-Flop IC (e.g., 7474)
• Resistors
• Power supply
• Breadboard and wires

Procedure

1. Set up the flip-flop circuit to toggle between two stable states.

2. Connect the output to the relay to control the switching of a load (e.g., light or motor).

Expected Result

The relay will toggle between two states, turning the load on and off based on the flip-flop state.