Overview

This experiment demonstrates how to create a simple flip-flop circuit using logic gates, with LEDs indicating the state changes.

Components Required

• Logic gates (AND, OR, NOT, or NAND)
• LEDs
• Resistors (220Ω)
• Power supply
• Breadboard and wires

Procedure

1. Connect the logic gates to form a flip-flop circuit.

2. Use the LEDs to indicate the output of the flip-flop as it changes state.

3. Toggle the flip-flop using inputs to change the LED display.

Expected Result

The LEDs will turn on and off based on the state of the flip-flop, demonstrating the logic behavior.