non-inverting op-amp buffer circuit

Overview

This experiment demonstrates how a non-inverting op-amp buffer can be used to provide impedance matching without amplifying the signal.

Components Required

Procedure

1. Connect the op-amp in a non-inverting configuration with the input signal.

2. Observe the output, which should be the same as the input but with no amplification.

Expected Result

The output signal will be identical to the input but with higher input impedance.

Contact Us

If you have any questions or inquiries, feel free to reach out to us at Microautomation.no@icloud.com .

Follow our Socials for the newest updates!